100 ng/mL Panel/Cassette/Dipstick Accurate Alpra/zolam Single Drug Rapid Urine Test Medical Product
| Principle | Chromatographic Immunoassay |
| Format | Dipstick, Cassette, Panel, Cup |
| Specimen | Urine |
| Certificate | CE |
| Reading Time | 5 minutes |
| Pack | 40T/50T |
| Storage Temperature | 2-30°C |
| Shelf Life | 2 Years |
| Sensitivity | 90.90% |
| Specificity | 97.40% |
| Accuracy | 95.90% |
| Cut-Off | 100 ng/mL* |
Application:
The ALP Rapid Test (Urine) is a rapid chromatographic immunoassay for the detection of alpra/zolam in urine at a cut-off concentration of 100ng/ml. This test will detect other related compounds, please refer to the Analytical Specificity table in this package insert.
This assay provides only a qualitative, preliminary analytical test result. A more specific alternate chemical method must be used in order to obtain a confirmed analytical result. Gas chromatography/mass spectrometry (GC/MS) is the preferred confirmatory method. Clinical consideration and professional judgment should be applied to any drug of abuse test result, particularly when preliminary positive results are used.
Description:
How to use?
DIRECTIONS FOR PANEL USE
Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test panel from the sealed pouch and use it within one hour.
2. Remove the cap.
3. With the arrow pointing toward the urine specimen, immerse the test panel vertically in the urine specimen for at least 10 to 15 seconds. Immerse the strip to at least the level of the wavy lines, but not above the arrow on the test panel.
4. Replace the cap and place the test panel on a non-absorbent flat surface.
5. Start the timer and wait for the colored line(s) to appear.
6. The result should be read at 5 minutes. Do not interpret the result after 10 minutes
DIRECTIONS FOR DIPSTICK USE
Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test dipstick from the sealed pouch and use it within one hour.
2. With arrows pointing toward the urine specimen, immerse the test dipstick vertically in the urine specimen for at least 10-15 seconds. Do not pass the maximum line (MAX) on the Test Dipstick when immersing the strip. See the illustration below.
3. Place the test dipstick on a non-absorbent flat surface, start the timer and wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10 minutes.
INTERPRETATION OF RESULTS
(Please refer to the illustration above)
NEGATIVE:* Two lines appear. One colored line should be in the control line region (C), and another apparent colored line should be in the test line region (T). This negative result indicates that the Alpr/azolam(ALP) concentration is below the detectable cut-off level.
*NOTE: The shade of color in the test line region (T) may vary, but it should be considered negative whenever there is even a faint colored line.
POSITIVE: One colored line appears in the control line region (C). No line appears in the test line region (T). This positive result indicates that the Alpra/zolam(ALP) exceeds the detectable cut-off level.
INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test with a new test. If the problem persists, discontinue using the test kit immediately and contact your local distributor.
| Cat. No. | Product Description | Specimen | Format | Kit Size | Cut-Off | Status |
| DALP-102 | Alpraz/olam(ALP) Rapid Test Cassette | Urine | Cassette | 40 T | 100 ng/mL* | CE |
| DALP-114 | Alprazo/lam(ALP) Rapid Test Panel | Urine | Panel | 40 T | CE | |
| DALP-101 | Alprazo/lam(ALP) Rapid Test Dipstick | Urine | Dipstick | 50 T | CE |
Our products are sold all over the world, you can rest assured.
