Principle | Chromatographic Immunoassay |
Format | Dipstick, Cassette, Panel, Cup |
Specimen | Urine, Hair |
Certificate | CE |
Reading Time | 5 minutes |
Pack | 10T/40T/50T |
Storage Temperature | 2-30°C |
Shelf Life | 2 Years |
Sensitivity | 97.60% |
Specificity | 99.40% |
Accuracy | 98.80% |
Cut-Off | 500 ng/mL*, 1000 ng/mL, 0.2 ng/mg |
Cassette/Dipstick/Panel Ethyl Glucuronide (ETG) urine 500 ng/mL*1000 ng/mL Rapid Drug Abuse Test Kit For The Diagnosis
DIRECTIONS FOR CASSETTE USE
Allow the test, urine specimen, and/or controls to reach room temperature (15-30°C) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test cassette from the sealed pouch and use it within one hour.
2. Place the test cassette on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approx. 120μL) to the specimen well (S) of the test cassette, and then start the timer. Avoid trapping air bubbles in the specimen well (S). See the illustration below.
3. Wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10minutes.
DIRECTIONS FOR PANEL USE
Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.
1. Remove the test panel from the sealed pouch and use it as soon as possible.
2. Remove the cap.
3. With the arrow pointing toward the urine specimen, immerse the test panel vertically in the urine specimen for at least 10 to 15 seconds. Immerse the strip to at least the level of the wavy lines, but do no touch the plastic device.
4. Replace the cap and place the test panel on a non-absorbent flat surface.
5. Start the timer and wait for the colored line(s) to appear.
6. The result should be read at 5 minutes. Do not interpret the result after 10 minutes.
DIRECTIONS FOR DIPSTICK USE
Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test dipstick from the sealed pouch and use it within one hour.
2. With arrows pointing toward the urine specimen, immerse the test dipstick vertically in the urine specimen for at least 10-15 seconds. Do not pass the maximum line (MAX) on the Test Dipstick when immersing the strip. See the illustration below.
3. Place the test dipstick on a non-absorbent flat surface, start the timer and wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10 minutes.
Order Information
Cat. No. | Product | Specimen | Pack |
DET-102 | Ethyl Glucuronide (ETG) Rapid Test Cassette | Urine | 40 T |
DET-114 | Ethyl Glucuronide (ETG) Rapid Test Panel | Urine | 40 T |
DET-101 | Ethyl Glucuronide (ETG) Rapid Test Dipstick | Urine | 50 T |
DET-H902 | Ethyl Glucuronide (ETG) Rapid Test Cassette | Hair | 10 T |